About the Author: Calin is a network engineer, with more than 8 years of experience in designing, installing, troubleshooting, and maintaining large enterprise WAN and LAN networks. Currently he's Cisco (CCNA, CCNP, CCIP) and Linux (LPIC) certified and working to obtain CCIE certification.

Frame-Relay: PVC test with ping to own interface

Calin | Nov 13, 2008 | Comments 2

Let’s say that you have a link configured with Frame-Relay and from time to time you observe that the link is having some strange problems. Since you cannot be sure that the link is provided 100% error free you want to do your own tests. You want to see if the Frame-Relay between R0 and R1 is correctly configured. In order to verify this you want to set up the R0 to test the PVC to R1, by sending traffic to its own IP address.

Please download the topology here. The Frame-Relay between R0 and R1 is already configured.

See the tutorial below:

Digg This
Reddit This
Stumble Now!
Buzz This
Share on Facebook
Bookmark this on Delicious
Share on LinkedIn
Bookmark this on Technorati
Post on Twitter
Google Buzz (aka. Google Reader)

Popularity: 2% [?]

Filed Under: Cisco-frame-relay

Tags: • • • • •

This website uses IntenseDebate comments, but they are not currently loaded because either your browser doesn't support JavaScript, or they didn't load fast enough.

RSSComments (2)

Leave a Reply | Trackback URL

  1. tim says:
    November 14, 2008 at 1:00 am

    Nice tutorial. It really helped me with my study for CCIE RS. Good luck to you also with the exam!

    Reply
  2. Calin says:
    November 14, 2008 at 11:35 pm

    Thanks tim for your comment. I’m glad that I helped you!

    Reply

Leave a Reply